Advanced Search
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
May 22, 2012, 03:17:37 AM
Home
Help
Calendar
Login
Register
News
: Glomation introduces new GECM-9G25 SODIMM system on module
Glomation
»
Peer Support Forums
»
GESBC-9260
»
GESBC-9260S silent serial port
« previous
next »
Pages: [
1
]
Topic Tools
Topic Tools
Send this topic
Print
July 06, 2010, 04:12:01 AM
#0
embedded.user
embedded.user
Show embedded.user's last posts.
Show general stats for embedded.user.
Full Member
Posts: 1
GESBC-9260S silent serial port
I recently bought an embedded linux boards, specifically the GESBC-9260S.
The serial port is silent, i dont get a response when using minicom (hyperterminal), it is not my computer's problem as i have no problem talking to MikroTik RouterBOARDS.
I have set the bits per second to 115200, 8 data bits, no parity.
Am i missing something? I have read the manual thoroughly and does not give any advice in this situation.
Is there anyway to communicate with the board through some other port? such as ethernet port?
July 06, 2010, 08:46:46 AM
#1
admin
admin
Show admin's last posts.
Show general stats for admin.
Administrator
Super Hero
Posts: 342
Re: GESBC-9260S silent serial port
Please make sure you connect to the correct port. The debug port on the GESBC-9260S is P0, a 3pin header behind the DB9 connector.
Pages: [
1
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General Category
-----------------------------
=> Announcements
=> General Discussion
=> Programming Tips, Recommendded Readings, etc.
-----------------------------
Peer Support Forums
-----------------------------
=> GESBC-9302
=> GESBC-9260
=> GESBC-9G20
=> GESBC-2440
=> GESBC-9315
Loading...
Send this topic
Print