Advanced Search
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
May 22, 2012, 04:10:53 AM
Home
Help
Calendar
Login
Register
News
: Welcome to GLomation peer support forum
Glomation
»
Peer Support Forums
»
GESBC-9260
»
No U-Boot output on power-up ????
« previous
next »
Pages: [
1
]
Topic Tools
Topic Tools
Send this topic
Print
January 11, 2009, 03:47:30 PM
#0
Bob Smith
Bob Smith
Show Bob Smith's last posts.
Show general stats for Bob Smith.
Full Member
Posts: 1
No U-Boot output on power-up ????
I have a new 9260S and the manual says that in the default configuration I should see a U-Boot prompt at power-up. This does not happen. There is no U-Boot prompt.
I know the board works since two minutes after applying power there is a Linux login prompt.
Help!
thanks
Bob Smith
January 11, 2009, 07:27:07 PM
#1
admin
admin
Show admin's last posts.
Show general stats for admin.
Administrator
Super Hero
Posts: 342
Re: No U-Boot output on power-up ????
It seems that you connected to the UART1 instead of the debug UART. The DB9 conenctor on the GESBC-9260S is UART1. The debug UART is a 3 pin header marked P0 on the board. Please connect to the P0 port to see the U-boot and Linux boot log.
Pages: [
1
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General Category
-----------------------------
=> Announcements
=> General Discussion
=> Programming Tips, Recommendded Readings, etc.
-----------------------------
Peer Support Forums
-----------------------------
=> GESBC-9302
=> GESBC-9260
=> GESBC-9G20
=> GESBC-2440
=> GESBC-9315
Loading...
Send this topic
Print